Severna Park, Anne Arundel County, MD
Fences for Severna Park Yards, Covenants and Shoreline Included
Severna Park yards are mostly established single-family lots with mature trees, and the fences on them tend to be replacements: a leaning 1980s stockade run, a chain-link line from the original build, or a pool enclosure that no longer meets the barrier rules. Roso installs wood privacy, vinyl, and aluminum fencing throughout the peninsula, with posts set in concrete below frost depth.
Anne Arundel County reviews fences as residential accessory structures, and county rules add conditions for corner lots, pool enclosures, and waterfront properties. Layered on top of that, many Severna Park communities have covenants that must approve a fence before it goes in. Getting both right before we dig is the difference between a fence that lasts and one you are asked to move.
Planning locally
What to know before building a fence in Severna Park
- County review as an accessory structure
- Because Severna Park is unincorporated, Anne Arundel County handles fence review. The county lists fences among residential accessory structures. Height limits, corner-lot sight lines, and pool-barrier requirements are the points most likely to affect a design, and requirements differ by zoning district, so we confirm the rules for your specific address before quoting. Source: Anne Arundel County, Residential Permits
- Fences in the Critical Area buffer
- On lots along the Severn or Magothy, the 100-foot Critical Area buffer limits clearing and ground disturbance. A fence line that runs through the buffer may need a buffer management plan, and clearing vegetation to install it is restricted. We route fence lines to avoid the buffer where possible. Source: Anne Arundel County, Critical Area program
- Association approval before installation
- Chartwell's covenants state that no fence or wall may be built without the association's architectural approval, and other Severna Park communities have comparable rules on style, height, and color. We provide the drawing and material description for your application. Source: Chartwell Community Association covenants
Requirements vary by property and change over time. We confirm the current rules for your address as part of every estimate rather than assuming.
Design and materials
Fences that suit Severna Park homes
What Roso builds
- Wood privacy fence
- Picket and decorative wood
- Vinyl privacy and picket
- Aluminum ornamental
- Gates and hardware
- Fence removal and replacement
- Six-foot privacy where yards back onto each other
- In the 1960s and 1970s grid neighborhoods, rear yards meet rear yards and a six-foot board-on-board or solid-board fence in pressure-treated pine or vinyl is the usual choice. Board-on-board hides the seasonal shrinkage gaps that appear in a single-layer fence after a few Maryland summers.
- Aluminum where the view matters or a pool is involved
- On water-view lots and around pools, black aluminum ornamental fencing keeps sightlines open, does not rust in humid shoreline air, and meets pool-barrier rules when paired with self-closing, self-latching gates.
- Plan gates for the mower and the boat trailer
- Severna Park yards often store a trailer, kayaks, or a riding mower. A double drive gate sized for the widest thing you own, with heavier posts and a drop rod, avoids the most common regret we hear about after a fence is installed.
Scope and estimate
What shapes a fence estimate
We price after a site visit, not from a form. These are the factors your written estimate will itemize.
Linear footage
Fence is priced largely by the foot, so longer runs cost more but usually less per foot.
Material and style
Pressure-treated privacy is typically the most economical; cedar, vinyl, and aluminum cost more per foot.
Height
Taller fences use longer posts and more material and may require a permit or variance.
Gates
Each walk or drive gate adds hardware and labor. Wide drive gates need heavier posts.
Terrain and obstacles
Slopes, rock, roots, tight access, and existing fence removal all add time.
Corners and ends
Complex layouts with many corners need more posts and cuts than a simple rectangle.
How it works
From estimate to finished fence
Step 1: Estimate request
Tell us the purpose of the fence, rough footage if you know it, and your ZIP code.
Step 2: Site walk and layout
We locate the property line with you, measure runs, note grade changes and obstacles, and discuss style and gate locations.
Step 3: Written estimate
Footage, style, height, gates, and any removal itemized so you can compare options.
Step 4: Permits, HOA, and utility marking
We confirm whether your county requires a permit at your height, help with HOA submittals, and have utilities marked before digging.
Step 5: Installation and walkthrough
Posts, rails, panels, and gates installed, debris removed, and a final walkthrough with you.
FAQs
Fences in Severna Park: your questions
Answers specific to fence projects in Severna Park. General fences questions are covered on our main fences page.
Anne Arundel County reviews fences as residential accessory structures, and the answer depends on height, whether the lot is a corner lot or waterfront, and whether the fence encloses a pool. Because Severna Park is unincorporated, the county is the only permitting authority. We confirm the requirement for your address before installation and handle the application when one is needed.
Most Severna Park associations require written approval of the fence style, height, color, and location before installation, and some charge a review fee. Chartwell's covenants, for example, prohibit building any fence or wall without architect approval. Approval is separate from the county's review, so we prepare a drawing and material list you can submit.
Often not all the way. The 100-foot Critical Area buffer along tidal water limits clearing and disturbance, and a fence through the buffer may require a buffer management plan. We usually stop the fence at the buffer line or route it to avoid the shoreline vegetation, and we confirm the buffer location on the county's Critical Area maps.
Aluminum and vinyl. Neither rots or needs staining, and aluminum does not rust in humid shoreline air. Pressure-treated and cedar wood fences last well when posts are set correctly and the fence is cleaned and sealed periodically, and wood remains the most economical choice for a full privacy fence.
We adjust post spacing to miss large roots where we can, hand-dig around trees rather than augering through them, and use shorter panels or a step in the fence line when a trunk sits on the property line. Cutting major roots to force a straight line damages the tree and is rarely worth it.
A typical Severna Park yard is fenced in one to three days on site once materials are in hand and utilities are marked. Post concrete cure time can add a day before gates are hung. Any county or association review happens before installation and varies by property.
Free estimate
Request a free fence estimate in Severna Park
Tell us about your Severna Park project. We'll follow up to schedule a site visit and send a written estimate.
What happens next
- Tell us about your project. Send the estimate form or call. Share your project type, ZIP code, and what you have in mind so we can prepare for the conversation.
- Site visit and measurements. We walk the property with you, measure, check grade and access, and talk through layout, materials, and anything that affects cost.
- Written estimate. You receive a written estimate that spells out scope, materials, and price so you can compare options and ask questions before deciding.
- No cost, no obligation
- Your details are used only to discuss your project
Prefer to talk? (410) 871-8175
More in and around Severna Park
Other services in Severna Park
Ready to plan your Severna Park fence?
Send a few details and we'll follow up to schedule a site visit and prepare a written estimate. No cost, no obligation.