Crofton, Anne Arundel County, MD
Fences for Crofton Yards That Pass Covenant Review
Crofton's original 1960s and 1970s sections were laid out as a planned community with covenants from the start, and a fence there is still something the community reviews. Roso installs wood privacy, picket, vinyl, and aluminum fences for Crofton homes, from the colonials and split-levels inside the Triangle to the townhome and single-family phases built around it, and we design each one to satisfy the covenants as well as the homeowner.

Two reviews apply on most Crofton lots. Anne Arundel County treats fences as residential accessory structures and sets the height, corner-lot, and pool rules for your zoning district. Inside the Crofton Special Community Benefit District, the Crofton Civic Association's Covenant Review Committee must approve an Architectural Design Review application before the fence goes in, and its standards on style, height, and placement apply in addition to the county's.
Planning locally
What to know before building a fence in Crofton
- Covenant Review Committee approval comes first
- Inside the Special Community Benefit District, the Crofton Civic Association's covenants require an Architectural Design Review application to the Covenant Review Committee before exterior changes, and a fence is a common submittal. Expect to show location on your plat, style, height, and color. Approval is separate from any county permit. We provide the drawing and material description and confirm the current process with the association. Source: Crofton Civic Association, covenants and review
- County review as a residential accessory structure
- Anne Arundel County lists fences among residential accessory structures. Whether a permit is required depends on height, corner-lot position, and pool enclosure, and the rules vary by zoning district, so confirm for your property. We check the requirement for your address before quoting and file when one is needed. Source: Anne Arundel County, Residential Accessory Structure permit
- Utility easements instead of shoreline buffers
- Crofton has no Critical Area buffer and no tidal floodplain, so the constraints on a fence line are the ordinary ones: utility and drainage easements along rear and side lines, county setback and sight-line rules on corner lots, and the true property line. A fence in an easement can be removed by the utility at your expense, so we check the plat and call for utility marking before digging.
Requirements vary by property and change over time. We confirm the current rules for your address as part of every estimate rather than assuming.
Design and materials
Fences that suit Crofton homes
What Roso builds
- Wood privacy fence
- Picket and decorative wood
- Vinyl privacy and picket
- Aluminum ornamental
- Gates and hardware
- Fence removal and replacement
- Draw two options where the covenants may prefer one
- The Covenant Review Committee reviews style and height, and a full six-foot privacy fence on all sides of an original Crofton lot is the design most likely to draw questions. We usually prepare a primary option and a fallback, for example board-on-board along the rear line with four-foot picket on the sides, so approval does not mean starting the design over.
- Work with fifty-year-old roots
- The trees planted when Crofton was built are now large, and their roots run along the property lines where fences go. We shift post spacing to miss major roots, hand-dig near trunks, and use a shorter panel or a small jog in the line where a trunk sits on the boundary. Cutting large roots to force a straight run weakens the tree and is rarely worth it.
- Vinyl for shaded yards, wood where the covenants ask for it
- Under heavy tree cover, wood fences stay damp and mildew. Vinyl in white or tan holds its color without staining and suits the traditional look of the original sections. Where the association's standards call for wood, cedar or treated pine picket or board-on-board, with posts set below frost depth on a gravel bed, is the durable choice.
Scope and estimate
What shapes a fence estimate
We price after a site visit, not from a form. These are the factors your written estimate will itemize.
Linear footage
Fence is priced largely by the foot, so longer runs cost more but usually less per foot.
Material and style
Pressure-treated privacy is typically the most economical; cedar, vinyl, and aluminum cost more per foot.
Height
Taller fences use longer posts and more material and may require a permit or variance.
Gates
Each walk or drive gate adds hardware and labor. Wide drive gates need heavier posts.
Terrain and obstacles
Slopes, rock, roots, tight access, and existing fence removal all add time.
Corners and ends
Complex layouts with many corners need more posts and cuts than a simple rectangle.
How it works
From estimate to finished fence
Step 1: Estimate request
Tell us the purpose of the fence, rough footage if you know it, and your ZIP code.
Step 2: Site walk and layout
We locate the property line with you, measure runs, note grade changes and obstacles, and discuss style and gate locations.
Step 3: Written estimate
Footage, style, height, gates, and any removal itemized so you can compare options.
Step 4: Permits, HOA, and utility marking
We confirm whether your county requires a permit at your height, help with HOA submittals, and have utilities marked before digging.
Step 5: Installation and walkthrough
Posts, rails, panels, and gates installed, debris removed, and a final walkthrough with you.
FAQs
Fences in Crofton: your questions
Answers specific to fence projects in Crofton. General fences questions are covered on our main fences page.
Anne Arundel County treats fences as residential accessory structures, and whether a permit is required depends on height, corner-lot position, and pool enclosure, with rules that vary by zoning district. Because Crofton is unincorporated, the county is the only permitting authority, but inside the Special Community Benefit District the Crofton Civic Association's covenant approval is also required. We confirm both for your address.
An Architectural Design Review application to the Covenant Review Committee, showing the fence location on your plat, the style, the height, and the color, with approval before installation. This applies to properties inside the Special Community Benefit District and is separate from the county. We prepare the drawing and material description for your submittal and confirm the committee's current requirements with the association.
Generally not the Crofton Civic Association's covenants, which are tied to the Special Community Benefit District. Communities built around the Triangle often have their own homeowners associations with their own fence standards, so we ask which association, if any, governs your lot and prepare the submittal for it. The county's accessory-structure review applies either way.
No. Crofton is inland, outside the Chesapeake Bay Critical Area, and has no tidal floodplain, so the buffer management plans and floodplain waivers that affect fences in the county's waterfront communities do not apply. The practical limits here are utility easements, county setback and corner-lot rules, and the property line, all of which we verify on the plat.
Vinyl or aluminum, because neither rots or grows mildew in damp shade under mature trees. Wood remains the most economical privacy option and the one some covenants prefer; treated pine or cedar with posts set below frost depth and periodic cleaning and sealing will last well. We help you choose based on your association's standards, your budget, and how much upkeep you want.
Installation itself takes one to three days on site once materials are delivered and utilities are marked, with a day for post concrete to cure before gates are hung. The Covenant Review Committee's approval, and any county review, happen first and vary in timing, so we start the application as soon as you approve the design.
Free estimate
Request a free fence estimate in Crofton
Tell us about your Crofton project. We'll follow up to schedule a site visit and send a written estimate.
What happens next
- Tell us about your project. Send the estimate form or call. Share your project type, ZIP code, and what you have in mind so we can prepare for the conversation.
- Site visit and measurements. We walk the property with you, measure, check grade and access, and talk through layout, materials, and anything that affects cost.
- Written estimate. You receive a written estimate that spells out scope, materials, and price so you can compare options and ask questions before deciding.
- No cost, no obligation
- Your details are used only to discuss your project
Prefer to talk? (410) 871-8175
More in and around Crofton
Other services in Crofton
Ready to plan your Crofton fence?
Send a few details and we'll follow up to schedule a site visit and prepare a written estimate. No cost, no obligation.